Balinese Flag WAVE, Umbul Umbul, Wind Dancer Flag, Festival Flag, Party Flag
* Incl. VAT excl. Shipping
Scope of Delivery: One Bali Flag (without flagpole) with a heart-shaped tip (Balinese Flag WAVE, Umbul Umbul, Wind Dancer Flag, Festival Flag, Party Flag),
Wave cut fabric.
Material: Satin fabric (polyester fabric), sturdy and high tear resistance, easily washable
The special feature of the Bali flag WAVE is that the hem is sewn before the end. The pole can therefore only be inserted up to the seam and the flutter tail streams freely in the wind.
These flags are cut and sewn straight, but also adapt to a curved flagpole or round arch. We recommend the use of the round arch KB100 since there is not straight tip, which usually pierces quickly through the flag fabric. Alternatively you can put a SC50 hose on the tip of the rod to dull the tip.
Handmade in Bali: Since the flags are made by hand, there might be small deviations in the specified dimensions.
Flag pole: The hem is at least 7 cm wide at the bottom, so that the flag fits comfortably on our telescopic poles, but it can also be pulled onto a bamboo pole.
Flag length: Overall length of the fabric, from the bottom hem to the tip, when the flag is laid out straight.
Flag length: 3 metres:
-
Flag width below: ca. 50 cm,
-
Length of the sewn-off flutter-tail: ca. 45 cm,
-
Insertion length of the pole: ca. 2.55 metres,
-
Matching flagpole: 3.00 metres.
Flag length: 4 metres:
-
Flag width below: ca. 55 cm,
-
Length of the flutter-tail: ca. 45 cm,
-
Insertion length of the pole: ca. 3.55 metres
-
Matching flagpole: 4.00 metres..
Flag length: 5 metres:
-
Flag width below: ca. 60 cm,
-
Length of the flutter-tail: ca. 50 cm,
-
Insertion length of the pole: ca. 4.50 metres
-
Matching flagpole: 5 metres..
Flag length: 6 metres:
-
Flag width below: ca. 60 cm,
-
Length of the flutter-tail: ca. 75 cm,
-
Insertion length of the pole: ca. 5.25 metres
-
Matching flagpole: 6 metres.
Flag length: 7 metres:
-
Flag width below: ca. 60 cm,
-
Length of the flutter-tail: ca. 95 cm,
-
Insertion length of the pole: ca. 6.00 metres
-
Matching flagpole: 7 metres or 6 metres.
.
Item ID | 210002 |
Condition | New |
Model | 2009-300-26 |
Manufacturing country | Indonesia |
Content | 1 piece |
Net weight | 80 g |
Dimensions | 190×140×15 mm |
Item list